Safety instructions and approvals
2.5 Electromagnetic compatibility
KP8, KP8F
Operating Instructions, 10/2010, A5E03284305-01
27
Sinusoidal interference
The table below shows the EMC properties of the modules with respect to sinusoidal
interference. These specifications only apply when the HMI device meets the specifications
and directives regarding electrical installation.
Sinusoidal interference
Test values
Corresponds
to test
intensity
HF radiation (in
electromagnetic fields) in
accordance with IEC 61000-
4-3:2006
80% amplitude modulation at 1 kHz
with 10 V/m in the range of 80 MHz to 1 GHz
with 3 V/m in the range 1.4 GHz to 2 GHz
with 1 V/m the range 2 GHz to 2.7 GHz
10 V/m with 50 % pulse modulation at 900 MHz
10 V/m with 50 % pulse modulation at 1.89 GHz
3
RF interference current on
cables and cable shielding
conforming to IEC 61000-4-
6:2008
Test voltage 10 V at 80 % amplitude modulation of
1 kHz in the range from 9 kHz to 80 MHz
3
Emission of radio interference
The table below shows the emission values of electromagnetic interference conforming to
55011:2009, limit value class A, Group 1, measured at a distance of 10 m:
30 to 230 MHz
< 40 dB (V/m) quasi-peak
230 to 1000 MHz
< 47 dB (V/m) quasi-peak
Note
Before you connect the HMI device to the public power grid, ensure that it is compliant with
Limit Class B in accordance with EN 55022:2006.
