Siemens SIMATIC IPC847D Operating Instructions Manual Download Page 15

Page: 15 / 222

Overview

1.1 Product description

SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA

Optional accessories
DVI-I to VGA adapter

Used to connect a monitor with a VGA port to the PC (can be

ordered by configurator).

Operating system

Preinstalled and activated / included on restore DVD

•

Windows Server 2008 R2, MUI*, 64-bit

•

Windows 7 MUI*, 32 bits / 64 bits

*MUI: Multi language User Interface; 5 languages (German,

English, French, Spanish, Italian)

Power supply
Redundant AC power supply

Monitored 100–230 V AC power supply, 350 W

Operating system languages
The following languages for the operating system can be installed at a later time from the

recovery DVD:

Language

Windows Server 2008 R2

Windows 7

32/64-bit

German

English

French

Italian

Spanish

Japanese

Chinese (Hong Kong)

Chinese (simplified)

Chinese (Taiwan)

Korean

Russian

Optional software
SIMATIC IPC DiagMonitor V4.4.2 or

higher

Software tool for monitoring local and remote SIMATIC PCs:

•

Watchdog

•

Temperature

•

Fan speed

•

Hard disk monitoring (SMART, RAID status

)

•

Monitoring modules of the redundant power supply

•

System / Ethernet monitoring (Heartbeat)

SIMATIC IPC Image & Partition

Creator V3.3.2 or higher

Software tool for local data backup and setting up of the hard

disks.

A hot-spare drive of a RAID system is not displayed.

Summary of Contents for SIMATIC IPC847D































































































































































































































Search results

Summary of Contents for SIMATIC IPC847D

Reviews:

Brands by name

Popular brands

Siemens SIMATIC IPC847D, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC847D

Reviews:

Brands by name

Popular brands