Siemens SIMATIC IPC847D Operating Instructions Manual Download Page 11

Page: 11 / 222

Overview

1.1 Product description

SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA

1.1.3

Function

●

Integrated programmable monitoring functions (program execution (watchdog), internal

housing temperature, fan speed)

●

Enhanced diagnostic/messaging by way of Ethernet, e-mail, text, and for direct input in

SIMATIC software by way of OPC (optional using SIMATIC PC DiagMonitor):
–

Operating hours counter

–

Hard drive status, hot spare drives of a RAID system are not displayed

–

System status (heartbeat)

–

Automatic logging of all messages to a log file

–

Option of remote monitoring of networked SIMATIC IPCs

●

RAID1 (mirroring): For automatic data mirroring on two hard disks. Configurations with

hot-spare drive available for order.

●

RAID5 (striping with parity): For increased memory capacity and improved data security

on three hard disks. Configurations with hot-spare drive available for order.

Summary of Contents for SIMATIC IPC847D































































































































































































































Search results

Summary of Contents for SIMATIC IPC847D

Reviews:

Brands by name

Popular brands

Siemens SIMATIC IPC847D, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC847D

Reviews:

Brands by name

Popular brands