Siemens SIMATIC IPC327G Operating Instructions Manual Download

Page: 30 / 95

Installing and connecting the device

3.3 Connecting the device

SIMATIC IPC327G

Operating Instructions, 09/2021, A5E51366275-AA

Industrial Ethernet

You can establish a network between the device and other computers through Industrial

Ethernet. The on-board LAN interfaces are twisted-pair TP interfaces that support data

transmission rates of 10/100/1000 Mbps.

Note

You need a category 6 Ethernet cable for operation at 1000 Mbps.

PROFINET

PROFINET can be operated via:
•

Standard Ethernet interfaces (RT)

SIMATIC NET

Use this software package to create, operate and configure an innovative network for Field &

Control level. Information on this can be found on the SIMATIC NET Manual Collection CD.

The software package and the documentation are not included in the product package.

Additional information

You can find additional information in Technical support. (Page 77)

Summary of Contents for SIMATIC IPC327G
































































































Search results

Summary of Contents for SIMATIC IPC327G

Reviews:

Related manuals for SIMATIC IPC327G

Brands by name

Popular brands

Siemens SIMATIC IPC327G, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC327G

Reviews:

Related manuals for SIMATIC IPC327G

Brands by name

Popular brands