Installing and connecting the device
3.6 Connecting the device
Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 08/2022, A5E33472156-AP
21
5.
Check that the stainless steel front is in contact with the mounting location on all sides and
that the mounting seal is pressed against the surrounding area.
6.
Check that the fixed stop has been reached on all mounting clips and that the mounting
gasket is installed correctly. Correct the tightening torque, if necessary, so that the clamping
force is evenly distributed.
Removal
For removal, follow the steps for installation in reverse order. Dispose of the used mounting
gasket.
3.6
Connecting the device
The specifications in the relevant operating instructions apply.
Please also note the following information.
Connection in hazardous areas
WARNING
Explosion hazard
The audio connectors are only designed for temporary connection.
Do not use, connect or disconnect until the device is in a non-hazardous area.
Connecting or disconnecting in a hazardous environment could cause an explosion.
Securing cables
After connecting the USB cables, secure them to the corresponding fixing elements using the
cable ties.
TP700 Comfort INOX
TP900 Comfort INOX
TP1200 Comfort INOX
TP1500 Comfort INOX
TP1900 Comfort INOX, ITC1900 INOX
