Siemens SIMATIC ET 200SP Function Manual Download Page 205

Page: 205 / 362

OPC UA communication

9.3 Using the S7-1500 as an OPC UA server

Communication

204

Function Manual, 11/2019, A5E03735815-AH

Once a server interface has been defined, you can drag it to another CPU in the project tree.

Figure 9-31 Disabling the visibility of the server interface

Information on the server interface

The "OPC UA Server Interface" dialog is structured as a table and provides the following

information:
Note that not all columns are displayed initially. You determine what is displayed by right-

clicking on the header line of the table.
When a row is selected, you can display the OPC UA attributes of the node in the Inspector

window ("OPC UA attributes" area), such as node ID, node class, node type, and

description.

●

BrowseName
The language neutral name of the user-defined server interface is at the top

(BrowseName). This name can be freely selected.
The names (BrowseNames) of the individual OPC UA nodes that have been added to the

server interface are under the name of the interface.
You cannot change the name of an OPC UA node in this dialog. The names come from

the STEP 7 project.
You can delete an OPC UA node from the table. This means that it no longer belongs to

the server interface and is no longer visible to OPC UA clients.

●

DisplayName
Similar to BrowseName. However, the name can be translated and is displayed, if

available, in the corresponding language.

●

Node ID
NodeId of the OPC UA node, e.g. http://Server-Node_1; i=1

Summary of Contents for SIMATIC ET 200SP











































































































































































































































































































































































Search results

Summary of Contents for SIMATIC ET 200SP

Reviews:

Brands by name

Popular brands

Siemens SIMATIC ET 200SP, Function Manual

Search results

Summary of Contents for SIMATIC ET 200SP

Reviews:

Brands by name

Popular brands