background image

 

Introduction 

 

SIMATIC RTLS4060T 
Operating Instructions, 01/2021, C79000-G8976-C550-03 

7

 

Security recommendations 

General 

Note the following security recommendations to prevent unauthorized access: 

 

Keep the firmware up to date. Check regularly for security updates for the device. You can 

find information on this at the Industrial Security 

(

https://new.siemens.com/global/en/company/topic-areas/future-of-

manufacturing/industrial-security.html

) website. 

 

Inform yourself regularly about security recommendations published by Siemens 

ProductCERT (

https://new.siemens.com/global/en/products/services/cert.html

)

 

Evaluate your plant as a whole in terms of security. Use a cell protection concept with 

suitable products. 

 

This product requires an additional security concept to prevent unauthorized access. 

 

Transponder and infrastructure can be configured for radio channels according to IEEE 

802.15.4-2015. You will find details in the section 
"Technical specifications". 

 

Ensure that the radio frequencies are not used for other purposes and are not affected by 

other interfering signals. This should be ensured within the operating range of the 

localization system. 

 

Interference in the frequency band used can impair the system and, in extreme cases, lead 

to localization failure. 

Physical access 

 

Restrict physical access to the device to qualified personnel. 

 

Disable unused physical interfaces of the device. Unused interfaces could be used to gain 

access to the operating site. 

Recycling and disposal 

The products are low in harmful substances, can be recycled and meet the requirements of 

the Directive 2012/19/EU for disposal of waste electrical and electronic equipment (WEEE). 
Do not dispose of the products at public disposal sites. 
For environmentally compliant recycling and disposal of your electronic waste, please contact 

a company certified for the disposal of electronic waste or your Siemens representative. 
Note the different national regulations. 

Summary of Contents for SIMATIC 6GT2700-6DE03






















Reviews: