B
B
A
A
D
D
C
C
In the case of suspended wooden floors, place
the machine on a water-resistant wooden board
(plinth) of at least 30mm thickness which is
screwed to the floor. If possible, install the
machine in a corner of the room. Secure the
machine’s feet with brackets (this applies
particularly to tower arrangements).
Removing the
transport bolts
Remove the four spacers B. They will fall to the
floor when you tip the machine.
Caution
The transport bolts must always be removed
before using the appliance for the first time and
must be retained for any subsequent transport
(e.g. when moving). Use the spanner provided
only if a ring spanner is unavailable.
Undo the 4 fixing bolts A and remove them.
Insert cover caps C which you will find in the bag
containing the documentation.
46
