Pull out the strainer and rinse under running
water.
Turn on the water tap and check whether water
is still discharged. If water is still discharged,
check that the strainer is attached properly.
Insert the strainer and reconnect the hose.
Turn off the water tap.
Disconnect the hose from the back of the
washing machine.
Cleaning the strainer on
the washing machine
Disconnect the hose from the water tap.
Rinse the strainer under flowing water.
Reconnect the hose.
Cleaning the strainer at
the water tap
Cleaning water inlet
strainers
Turn off the water tap.
Turn the program selector to any programme.
(Except “Spin” and “Drain” )
Press the Start button, and allow the programme
to run for approx.40 seconds.
This is necessary if very little or no water flows
into the washing machine.
First release the water pressure in the supply
hose:
36
