background image

en

21

Changing the programme

It is possible to change the programme
within 2 minutes after you have switched
the dishwasher on.
Should it be necessary to change the
programme after this period, the
programme cycle that has already been
begun (e.g. washing) will be completed
first of all.
The new remaining time displayed is the
sum of the remaining time from the
preceding programme cycle and the
remaining time attributable to the new
programme that has been selected.

Intensive drying

If the “Intensive drying” function is
activated, the temperature of the final rinse
is increased in all programmes and you
will therefore receive an improved drying
result. (Note the higher temperature may
not be suitable for fragile utensils.)

Hold down the programme button  A
and switch on the main switch.
Release both buttons.
The digital display 

4

 flashes 

 (on)

or 

 (off).

To change the setting, press the
programme button  .

Switch off the main switch 

1

;

the setting is stored.

Maintenance and care

A regular inspection and maintenance
of your machine will help to prevent faults.
This saves time and prevents problems.
Therefore you should occasionally have
a careful look inside your dishwasher.

Overall condition
of the machine

Check spray arm for grease and
limescale deposits.

If you find such deposits:

Fill the detergent dispenser with
detergent, start the appliance without
utensils in the programme which has
the highest wash temperature.

Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.

Regularly wipe the door seal with
a damp cloth to remove deposits.

Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.

Attention!

Never use other chlorinated household
detergents! Health hazard!

Dishwasher salt

Check the LOW SALT indicator 

6

 or

24

. Top up with salt, if required.

Rinse-aid

Check the LOW RINSE-AID indicator

7

 on the front panel  or the level

indicator on the rinse-aid container

29

. Top up with rinse-aid, if required.

Downloaded from DishWasher-Manual.com Manuals

Summary of Contents for SF 65T350

































Reviews: