Alarm Setpoints
34
6.10
Under PF Lagging
To alarm on under power factor lagging:
1.
From the
Alarms Menu
, select
Under PF Lagging.
2.
Select a pickup value by pressing the Up
or Down
Arrow keys until the value is at the desired level. Press
Enter
. Values appear in the following table.
3.
Select a delay time by pressing the Up
or Down
Arrow keys until the value is at the desired level. Possible
time delay settings are 1, 2, 3, 5, 10, 20, 30, 60, 120, and
300 seconds. When the desired value displays, press
Enter .
4.
Highlight the ALARM box and press the Up
Arrow key
so that a checkmark appears in the box.
5.
Press Escape
to leave the menu and press Enter
at
the verification screen to accept the new settings and
leave the menu.
6.11
Over PF Leading
To alarm on over power factor leading:
1.
From the
Alarms Menu
, select
Over PF Leading
2.
Select a pickup value by pressing the Up
or Down
Arrow keys until the value is at the desired level. Press
Enter
. Values appear in the following table.
3.
Select a delay time by pressing the Up
or Down
Arrow keys until the value is at the desired level. Possible
time delay settings are 1, 2, 3, 5, 10, 20, 30, 60, 120, and
300 seconds. When the desired value displays, press
Enter .
4.
Highlight the ALARM box and press the Up
Arrow key
so that a checkmark appears in the box.
5.
Press Escape
to leave the menu and press Enter
at
the verification screen to accept the new settings and
leave the menu.
Under Power Factor (Lagging)
Alarm Settings
Pickup
Values
0.50
0.60
0.70
0.80
0.90
0.95
Over Power Factor (Leading)
Alarm Settings
Pickup
Values
0.50
0.60
0.70
0.80
0.90
0.95
