Siemens SENTRON 3VA1 Manual Download

Page: 251 / 676

Accessories

4.3 Connection system

3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03

249

Terminal cover
The terminal cover is compatible with:

●

Box terminals

●

Wire connectors

●

Nut keeper kits

The terminal cover is simply snapped into place on 3VA1 breakers, or is snapped into place

and secured with two screws on 3VA2 breakers.

Terminal cover extended
The terminal cover extended always consists of two parts:

①

Rear insulating plate, provides insulation from the panel mounting plate

②

Front half, pushed over the molded case circuit breaker from the front

The insulating plate is fitted to the rear panel of the molded case circuit breaker and then

secured by two screws to the front half of the terminal cover. The terminal cover extended is

also secured by two additional screws to the molded case circuit breaker itself.
The terminal cover extended is compatible with:

●

Wire connectors, large (terminal cover extended included in scope of supply)

●

Wire connectors, 2 cables (terminal cover extended included in scope of supply)

●

Wire connectors, 6 cables (terminal cover extended included in scope of supply)

●

Front bus connectors extended

●

Bus connectors edgewise

Summary of Contents for SENTRON 3VA1





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SENTRON 3VA1

Reviews:

Related manuals for SENTRON 3VA1

Brands by name

Popular brands

Siemens SENTRON 3VA1, Manual

Search results

Summary of Contents for SENTRON 3VA1

Reviews:

Related manuals for SENTRON 3VA1

Brands by name

Popular brands