manualshive.com logo in svg

Siemens SD 270, Operating Manual, Page: 8 / 84

Share
Download
Siemens SD 270 Operating Manual Download Page 8

8

2  Important Safety Instructions

Safety Note!
Any modification of the device itself or its accessories is not 
allowed and may lead to inaccepteable risk of harm or inju-
ries.

Safety Note!
The SD 270 diagnostic audiometer must be used only by  
practitioners qualified to perform audiometric tests. It is  
intended for use as a screening and diagnostic tool.

2.1 Precautions

READ THIS OPERATING MANUAL BEFORE ATTEMPTING TO USE 
THE INSTRUMENT.
To comply with the standards IEC 60601-1 for safety and  
IEC 60601-1-2 for EMC the audiometer is designed to be used  
only with the medically-approved mains adapter supplied, which  
is specified as part of the equipment. 

Do not use any other type  

of mains adapter with this instrument. Refer to Section 12 for  
the stock number of the adapter.
The audiometer is for indoor use only and should be used only as 
described in this manual.
The transducers supplied with the audiometer are specifically  
calibrated with it; if these transducers are changed calibration  
will be required.
Do not immerse the unit in any fluids. See Section 8 for the proper 
cleaning procedure for the instrument and its accessories and the 
function of single-use parts.
Do not use the instrument in an oxygen-rich environment or in the 
presence of a flammable anaesthetic mixture or other flammable 
agents.

Summary of Contents for SD 270





















































































Reviews:

No comments