Siemens SCALANCE X308-2M Compact Operating Instructions Download Page 29

Page: 29 / 58

Assembling

4.4 Installation of modular devices

SCALANCE X-300M
Compact Operating Instructions, 10/2014, A5E02630801-06

4.4

Installation of modular devices

4.4.1

Installation and removal of media modules

Connecting media modules and SFP transceivers

NOTICE
Use only approved SFPs
If you use components not approved by Siemens AG, in particular SFPs, Siemens cannot

accept any responsibility for the correct functioning of the "Ethernet switch system"

according to the specification.
Moreover, if components are used that have not been Siemens approved, Siemens cannot

vouch for their compatibility or for risk-free use of these components.

WARNING

Install and remove media modules only when the power is off
Media modules may only be inserted in or removed from a SCALANCE device when the

power supply to the device has been turned off.
Use only approved media modules
Use only "MM900" media modules in the module slots of SCALANCE devices.

Note
Use media modules only in an approved modular device
Use an MM900 media module only for a device equipped with suitable slots for such

modules. Example: X308-2M.
The names and labeling of the media modules differ

•

Example: The device is called, for example, "MM992-2SFP" [6GK5 992-2AS00-8AA0], the

labeling on the device is "9922AS". You will find detailed information on the labeling of the

media modules in the "MM900 media modules" compact operating instructions.

Summary of Contents for SCALANCE X308-2M



























































Search results

Summary of Contents for SCALANCE X308-2M

Reviews:

Related manuals for SCALANCE X308-2M

Brands by name

Popular brands

Siemens SCALANCE X308-2M, Compact Operating Instructions

Search results

Summary of Contents for SCALANCE X308-2M

Reviews:

Related manuals for SCALANCE X308-2M

Brands by name

Popular brands