Description
3.5 LED display
SCALANCE X-300M
Compact Operating Instructions, 10/2014, A5E02630801-06
19
Meaning in display mode D
LED
Color
Status
Meaning
X308-2M (24 VDC)
X308-2M TS (12 VDC)
L1 / L2
-
off
Power supply L1 / L2 is not
monitored. If L1 / L2 falls
below 17 V *
)
, the signaling
contact does not respond.
Power supply L1 / L2 falls
below 12 V,
the signaling contact does
not respond.
green
on
Power supply L1 / L2 is
monitored. If L1 / L2 falls
below 17 V *
)
, the signaling
contact responds.
Power supply L1 / L2 is
monitored. If L1 / L2 falls
below 12 V, the signaling
contact responds.
L
-
off
Power supplies L1 and L2 are not monitored. If L1 or L2
falls below 17 V, the signaling contact does not respond.
orange
on
Power supply L1 or L2 is monitored. If L1 or L2 falls below
17 V, the signaling contact responds.
green
on
Power supplies L1 and L2 are monitored. If L1 and L2 fall
below 17 V, the signaling contact responds.
*
)
Limit voltage = 17 VDC
The P1, P2, ... LEDs for the port status
The P1, P2, ... LEDs show information on the status of their port (transmission speed, mode,
port monitoring). The meaning of these LEDs depends on the display mode ("DM" LED).
Meaning in display mode A
LED color
LED status
Meaning
-
off
No valid link to the port (for example station turned off or
cable not connected).
green
on
Link exists and port in normal status. In this status, the
port can receive and send data.
flashes once per second Link exists and port in "blocking" status. In this status, the
port only sends and receives management data (no user
data).
flashes 3 times per sec-
ond
Link exists and port turned off by management. In this
status, no data is sent or received via the port.
flashes 4 times per sec-
ond
Port exists and is in the "monitor port" status. In this sta-
tus, the data traffic of another port is mirrored to this port.
yellow
flashes / lit
Receiving data at port.
With SCALANCE X-300 devices, both the receipt and the
sending of data is indicated for the optical gigabit ports.
