ntpip 1 192.168.4.84
ntpip 2 192.168.4.89
ntpip 3 200.200.200.200
tz America/Montreal
show topology
Use the
show topology
command to display the IDs and names of IP interfaces.
show topology l3
Parameters
l3
Displays only topologies with an L3 configuration. The topologies are listed by
index number.
Usage
You can identify an IP using its interface name or, for short, the identifier returned by the
show
topology l3
command. Interface name is the name of any topology with L3 configuration (Physical,
Admin, B@AC or Routed).
Examples
Example code is not currently available.
show traffic_capture
Use the
show traffic_capture
command to display the status of traffic capture.
show traffic_capture
Parameters
None
Examples
The following is the example of the status display when the traffic capture is running:
WLC.siemens.com
# show traffic_capture
Interface:
Size: 1000(MB).
Filename: mgmt_traffic_dump.cap
Destination: local
Capture Status: stopped
Traffic Capture Files:
1:mgmt_traffic_dump.cap
root Commands
show topology
SCALANCE WLC711 CLI Reference Guide
71
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
