Siemens SBD8TC800E User Manual Download

Page: 50 / 68

Troubleshooting

Fault

Cause

Troubleshooting

E:9001 lights up.

Mains voltage is too low.

This is not a fault on the appliance.

Contact an electrician.

Have the mains voltage and elec-
trical installation checked by an
electrician.

E:9240 lights up.

Filters are soiled or blocked.

▶

Clean the filters.

→

"Cleaning filters", Page 43

A different error code ap-
pears in the display window.
E:0100 to E:9010

A technical fault is present.

Press .

Unplug the appliance or switch off
the fuse.

Wait at least 2 minutes.

Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.

Switch the appliance on.

If the problem occurs again:

‒

Press ⁠.

‒

Turn off the water tap.

‒

Pull out the mains plug.

‒

Contact "Customer Service"

→

Page 62

and give the er-

ror code.

Washing results

Fault

Cause

Troubleshooting

Tableware is not dry.

No rinse aid used or dosage
set too low.

Add "Rinse aid"

→

Page 29

Set the amount of rinse aid to be
dispensed.

→

"Setting the amount of rinse aid",

Page 30

Programme or programme
option has no drying phase,
or the drying phase is too
brief.

▶

"Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme."

→

Page 19

Some option buttons decrease the
drying result, e.g varioSpeed.

Summary of Contents for SBD8TC800E





































































Search results

Summary of Contents for SBD8TC800E

Reviews:

Related manuals for SBD8TC800E

Brands by name

Popular brands

Siemens SBD8TC800E, User Manual

Search results

Summary of Contents for SBD8TC800E

Reviews:

Related manuals for SBD8TC800E

Brands by name

Popular brands