6
Siemens Building Technologies
Fire Safety & Security Products
01.2009
Fig. 8
Operational setup
Before operating the system, all bus components have to
be connected to the E-bus and thus to the control unit.
Switch on the 230 V mains supply
1.
Ensure that everything is correctly connected and
wired and then switch on the mains supply externally
2.
Refit fuse
F7
.
Connect battery (Fig. 8)
1.
Place the battery in the space provided in the base of
the housing
2.
Mount the battery holder angle.
3.
Connect the pre-installed battery cables (- blue, + red).
Fig. 9
Close and seal the housing
1.
Glue the circuit diagram to the inside of the cover.
2.
Engage the cover in the retainer.
3.
Connect the earthing lead (1) Fig. 9 to the cover.
4.
Lightly lift and close the cover.
5.
Screw the cover closed.
6.
Use eye (2) Fig. 9 to seal.
When the cover is opened again, e.g. for servicing, there
is no need to remove the cover completely. After
loosening the screw, the cover can be lifted gently,
swung downwards and suspended in the base.
