manualshive.com logo in svg

Siemens RVD240, Basic Documentation

Share
Download
Siemens RVD240 Basic Documentation Download Page 102

102/126 

Siemens Building Technologies 

Basic documentation RVD240 

CE1P2384en 

HVAC Products 

29 Combination with PPS devices 

27.05.2004 

14 

– – – 

No function 

15 

Flow temperature heat-
ing circuit  

Heating circuit flow temperature according to 
the setting made on the controller’s operating 
line 158  

16 

Holidays (number of 
switch-off weekdays)  

Heating circuit will switch to standby 

 

17 

Reset to default values 

QAW70 default values are used 

• 

If setpoints (operating lines 2 and 3), time of day or the heating program are changed 
on the controller, the changes will also be adopted by the room unit  

• 

If setpoints (operating lines 2 and 4), time of day or heating program are changed on 
the controller, the changes will also be adopted by the room unit 

For detailed information, refer to the Installation Instructions of the QAW70 (G1637).  

29.3.5  Controller with operation lock 

 

The room unit acts fully on the controller also when an operation locking function on the 
controller has been activated (operating lines 195 and / or 196: Setting 

>

0). 

29.3.6  Entry of holiday periods  

 

With the help of the QAW70 room unit, the controller can be switched to the holiday 
mode. To be entered is the duration of the holiday period in days. The LCD of the room 
unit displays the entry as follows:  

• 

The weekday on which the holiday period ends appears on the left (1 = Monday, 2 = 
Tuesday, etc.)  

• 

The number of days of the holiday period appears on the right  

The holiday mode starts the moment the entry is made.  

In the holiday mode, the controller responds as follows:  

• 

The heating circuit is switched to standby (when there is risk of frost, the frost protec-
tion temperature will be maintained)  

• 

D.h.w. heating is switched off (when there is risk of frost, the frost protection tem-
perature will be maintained)  

• 

The holiday function is given priority over the operating mode of the room unit 

During the holiday period, the operating mode buttons of space heating 

 and 

d.h.w. 

; heating flash, provided the function was previously activated.  

The holiday function can prematurely be deactivated by pressing the operating mode 
button of the room unit.  
The holiday function of the room unit operates independently of the controller’s holiday 
function, which means that the holiday dates will not be matched.  

29.4 Room 

temperature sensor QAA10  

 

Room sensor QAA10 can be used in place of a room unit.  
The QAA10 acquires the room temperature with an NTC sensing element; its sensing 
range is 0...32 °C.  

Summary of Contents for RVD240































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands