Chapter 5
Certification
RUGGEDCOM WIN7023
Installation Guide
36
Other Approvals
IMPORTANT!
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this device.
Section 5.1.7
Other Approvals
This device meets the requirements of the following additional standards:
•
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
•
IEC 61850-3
General Requirements
•
IEC 870-2-2
Telecontrol Equipment and Systems – Part 2: Operating Conditions – Section 2: Environmental Conditions
(Climatic, Mechanical and Other Non-Electrical Influences)
•
MIL-STD-810F
Department of Defense Test Method Standard for Environmental Engineering Considerations and Laboratory
Tests – Method 509.4 (Salt Fog)
Section 5.2
EMC and Environmental Type Tests
The RUGGEDCOM WIN7023 has passed the following Electromagnetic Compatibility (EMC) and environmental
tests.
EMC Type Test for IEC 61850-3
Standard
Method
Description
Test Levels
Climatic Environmental Conditions
IEC 60068-2-1
IEC 61850-3 (5.2)
Low Temperature (Operational)
-40 °C (-40 °F), 16 Hour Dwell
IEC 60068-2-2
IEC 61850-3 (5.2)
High Temperature (Operational)
-65 °C (-149 °F), 16 Hour Dwell
IEC 60068-2-1
IEC 61850-3 (5.2)
Low Temperature (Storage)
-40 °C (-40 °F), 16 Hour Dwell
IEC 60068-2-2
IEC 61850-3 (5.2)
High Temperature (Storage)
-65 °C (-149 °F), 16 Hour Dwell
IEC 60068-2-30
IEEE 61850-3 (5.2)
Humidity (Operational)
95% at 55 °C (131 °F) for 96 Hours
IEC 60068-2-30
IEEE 61850-3 (5.2)
Humidity (Storage)
95% at 55 °C (131 °F) for 96 Hours
Mechanical Environmental Conditions
IEC 60068-2-27
IEC 61850-3 (5.5)
Shock
30 g (965 ft/s
2
)
IEC 60068-2-6
IEC 61850-3 (5.5)
Vibration
2 g (32 ft/s
2
), 10-150 Hz per Axis
EMC
