Siemens RUGGEDCOM RSG907R, Installation Manual

Page: 15 / 54

Installing the Device
2.2 Unpacking the Device
equipment ratings. Make sure to review all operating and installation instructions
before commissioning or performing maintenance on the device.
1. Review the relevant certification information for any regulatory
requirements.
For more information, refer to "Approvals (Page 37)" .
2. Unpack and inspect the device.
For more information, refer to "Unpacking the Device (Page 6)" .
3. Mount the device.
For more information, refer to "Mounting the Device (Page 8)" .
4. Connect the failsafe alarm relay.
For more information, refer to "Connecting the Failsafe Alarm Relay (Page
12)" .
5. Connect power and ground the device.
For more information, refer to "Connecting Power (Page 14)" .
6. Connect the device to the network.
For more information, refer to "Connecting the Device to the Network (Page
19)" .
7. Configure the device.
For more information, refer to "Configuring the Device (Page 26)" .
2.2 Unpacking the Device
When unpacking the device, do the following:
1. Inspect the package for damage before opening it.
2. Visually inspect each item in the package for any physical damage.
3. Verify all items are included.
IMPORTANT
If any item is missing or damaged, contact Siemens for assistance.
2.3 Installing the Device in Hazardous Locations
The RUGGEDCOM RSG909R is designed to comply with the safety standards for Class
I, Division 2, Zone 2 hazardous locations where concentrations of flammable gases,
vapors or liquids may be present, as opposed to normal operating environments.
6
RUGGEDCOM RSG909R
Installation Manual, 02/2021, C79000-G8976-1388-12