Siemens RUGGEDCOM RS969, Installation Manual

Page: 54 / 56

Chapter 7
Certification
RUGGEDCOM RS969
Installation Guide
44 EMC and Environmental Type Tests
Test Description Test Levels
Severity
Levels
DC Power ports 30% for 0.1 s, 60% for 0.1 s, 100% for 0.05 s — IEC 61000-4-29
30% for 1 period, 60% for 50 periods —
IEC 61000-4-11
Voltage Dips
& Interrupts
AC Power ports
100% for 5 periods, 100% for 50 periods
2
—
Signal ports 2.5 kV common, 1 kV differential mode @ 1MHz 3
DC Power ports 2.5 kV common, 1 kV differential mode @ 1MHz 3
IEC 61000-4-12 Damped Oscillatory
AC Power ports 2.5 kV common, 1 kV differential mode @ 1MHz 3
Signal ports 30 V Continuous, 300 V for 1 s 4 IEC 61000-4-16 Mains Frequency
Voltage
DC Power ports 30 V Continuous, 300 V for 1 s 4
IEC 61000-4-17 Ripple on DC
Power Supply
DC Power ports 10% 3
Signal ports 2 kV (Fail-Safe Relay output) —
DC Power ports 1.5 kV —
IEC 60255-5 Dielectric Strength
AC Power ports 2 kV —
Signal ports 5 kV (Fail-Safe Relay output) —
DC Power ports 5 kV —
IEC 60255-5 HV Impulse
AC Power ports 5 kV —
IEEE 1613 Type Tests
NOTE
• If the unit contains copper ports, the IEEE 1613 conformance is Class 1 (during disturbance, errors
may occur but recovery is automatic).
• If the unit contains all fiber ports, the IEEE 1613 conformance is Class 2 (during disturbance, no
errors will occur).
Description Test Levels
Enclosure Contact ± 8 kV ESD
Enclosure Air ± 15 kV
Radiated RFI Enclosure ports 35 V/m
Signal ports ± 4 kV @ 2.5 kHz
DC Power ports ± 4 kV
AC Power ports ± 4 kV
Fast Transient
Earth ground ports ± 4 kV
Signal ports 2.5 kV common mode @ 1MHz
DC Power ports 2.5 kV common & differential mode @ 1MHz
Oscillatory
AC Power ports 2.5 kV common & differential mode @ 1MHz