Siemens RUGGEDCOM RS950G, Installation Manual

Page: 32 / 42

Chapter 5
Technical Specifications
RUGGEDCOM RS950G
Installation Guide
22 Supported Networking Standards
Maximum Switching Voltage Rated Switching Current Isolation
220 VDC 0.24 A, 60 W
250 VAC 0.25 A, 62.5 W
Section 5.3
Supported Networking Standards
Standard 10 Mbps Ports 100 Mbps Ports 1000 Mbps Ports Notes
IEEE 802.3x
ü ü ü
Full Duplex Operation
IEEE 802.3z
ü
1000Base-LX
IEEE 802.3ab
ü
1000Base-Tx
IEEE 802.1D
ü ü ü
MAC Bridges
IEEE 802.1Q
ü ü ü
VLAN (Virtual LAN)
IEEE 802.1p
ü ü ü
Priority Levels
Section 5.4
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
RS950G.
Speed Connector Duplex
d
Cable Type
e
Wiring Standard
f
Maximum
Distance
g
Isolation
h
100Base-TX RJ-45 FDX/HDX > CAT 5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
100/1000Base-TX RJ-45 FDX/HDX > CAT 5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
d
Auto-Negotiating
e
Shielded or unshielded.
f
Auto-crossover and auto-polarity.
g
Typical distance. Dependent on the number of connectors and splices.
h
RMS 1 minute.
Section 5.5
Operating Environment
Ambient Operating
Temperature
ij
-40 to 85 °C (-40 to 185 °F)
Ambient Relative Humidity
k
5% to 95%