Siemens RUGGEDCOM RMC41, Installation Manual

Page: 27 / 36

Technical Specifications
4.4 Supported Networking Standards
Note
• All optical power numbers are listed as dBm averages. To convert from average
to peak add 3 dBm. To convert from peak to average, subtract 3 dBm.
• Maximum segment length is greatly dependent on factors such as fiber quality,
and the number of patches and splices. Consult a Siemens Sales associate when
determining maximum segment distances.
Wavelength (nm)
a
Transmit
Power (dBm)
Data
Rate
Mode Connector Cable
(μm)
Transmit Receive Min Max
Receiver
Sensitivity
(dBm)
Receiver
Saturation
(dBm)
Distance
(km)
a
100
Mbps
SM SC 9/125 1300 1300 -15 -8 -31 -7 15
100
Mbps
b
MM ST 62.5/125 1300 1300 -19 -14 -30 -14 2.5
100
Mbps
b
MM SC 62.5/125 1300 1300 -19 -14 -30 -14 2.5
155
Mbps
SM SC 9/125 1310 1310 -5 0 -35 -3 40
155
Mbps
SM SC 9/125 1310 1310 0 5 -37 -3 90
a
Typical.
b
Operating temperature: -10 to 85 °C (14 to 185 °F)
4.4 Supported Networking Standards
Parameter 10Base-FL 100Base-FX Notes
IEEE 802.3 Yes 10Base-T
IEEE 802.3u Yes 100Base-TX/100Base-FX
IEEE 802.3x Yes Yes Full Duplex, Flow Control
4.5 Operating Environment
Parameter Range Comments
Ambient Operating
Temperature
a
-40 to 85 °C
(-40 to 185 °F)
Measured from a 30 cm (12 in) radius
surrounding the center of the enclosure.
Ambient Relative Humidity 5% to 95% Non-condensing
Ambient Storage Temperature -40 to 85 °C
(-40 to 185 °F)
a
Typical. May change based on which fiber optic transceivers are installed. For more information, refer to
"Fiber Optic Ethernet Port Specifications (Page 17)" .
18
RUGGEDCOM RMC41
Installation Manual, 04/2021, C79000-G8976-1010-11