Installing the Device
2.3.2 Mounting the Device to a Panel
2.3.2
Mounting the Device to a Panel
To mount the device to a panel, do the following:
1. Disassemble the device and panel adapter.
a. Remove the screw at the bottom of the adapter.
b. Pull the device out of the adapter.
4
1
3
4
5
2
1
RUGGEDCOM RMC41
2
Panel Adapter
3
Mounting Holes
4
Screw
5
Metal Clips
Figure 2.3
Panel Mounting
2. Place the panel adapter against the panel and align the adapater with the
mounting holes.
3. Secure the panel adapter using three #6-32 screws.
4. Insert the device into the adapter. Make sure the device is secured between the
two metal clips.
5. Install the screw previously removed from the bottom of the panel adapter.
2.4
Connecting Power
The RUGGEDCOM RMC41 supports a single integrated high AC/DC or low DC power
supply
RUGGEDCOM RMC41
Installation Manual, 04/2021, C79000-G8976-1010-11
9
