RUGGEDCOM NETCONF
Reference Guide
Chapter 6
RUGGEDCOM ROX II Actions
reset (Cellular Modem)
63
</modem>
</interfaces>
</data>
</action>
</rpc>]]>]]>
•
{interfaceName}
The name of the modem interface.
•
{atCommand}
The AT command to send to the modem. The command must begin with the prefix AT.
Section 6.2.3
reset (Cellular Modem)
This action resets the cellular modem. Specify the modem module and port in the
<module>
and
<port>
elements. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<interfaces xmlns="http://ruggedcom.com/ns/rmf_ifs">
<cellmodem>
<module>{module}</module>
<port>{port}</port>
<reset/>
</cellmodem>
</interfaces>
</data>
</action>
</rpc>]]>]]>
•
{module}
The module number for the cellular modem.
•
{port}
The port number for the cellular modem.
Section 6.2.4
at (Cellular Modem)
This action sends an AT command to the cellular modem. The command must begin with the prefix AT. Specify
the modem module and port in the
<module>
and
<port>
elements. This action takes a single parameter:
<command>
.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<interfaces xmlns="http://ruggedcom.com/ns/rmf_ifs">
<cellmodem>
<module>{module}</module>
<port>{port}</port>
<at>
<command>{atCommand}</command>
</at>
Summary of Contents for RUGGEDCOM MX5000RE
