Siemens RUGGEDCOM MX5000RE, Reference Manual

Page: 70 / 148

Chapter 6
RUGGEDCOM ROX II Actions
RUGGEDCOM NETCONF
Reference Guide
58 shutdown
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<acknowledge-all-alarms/>
</admin>
</data>
</action>
</rpc>]]>]]>
Section 6.1.8
shutdown
This action shuts down the device. After using this action, the device shuts down and provides a time-out period
during which you can remove power from the device. The default time-out period is 300 seconds (five minutes).
At the end of the time-out period, the device reboots and restarts.
This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<shutdown/>
</admin>
</data>
</action>
</rpc>]]>]]>
Section 6.1.9
reboot
This action reboots the device. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<reboot/>
</admin>
</data>
</action>
</rpc>]]>]]>
Section 6.1.10
set-system-clock
This action sets the date and time on the system. This action takes a single parameter: <time> .
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<admin xmlns="http://ruggedcom.com/ns/rmf_admin">
<set-system-clock>
<time>{time}</time>
</set-system-clock>