OPERATING YOUR HEARING INSTRUMENT-
OPTIONAL FEATURES
15
GETTING STARTED
14
Operating Your Hearing
Instrument–
Optional Features
Refer to the feature card included with this manual to
determine the optional features your hearing instrument
is equipped with (Fig. 13).
Changing the volume
Your Siemens hearing instrument is fully automatic. However,
you may have received an optional remote control with your
hearing instrument. Press the Volume Up (+) button on the
remote to increase the volume. Press the Volume Down (-)
button on the remote to reduce the volume. Your hearing
instrument may have a toggle switch. To change the volume
using the toggle switch, push it up to increase the volume or
down to decrease the volume.
Fig. 13: FEATURE CARD
Optional features section circled
Optional
Features
HEARING
INSTRUMENT
FEATURE
CARD
Learning volume preference
Directional microphone
Rechargeable battery
ePocket
®
remote control
e2e wireless
®
Power on delay
Low battery indicator
Volume control
alert tones
Program change
alert tones
OPTIONAL FEATURES
PROGRAMS
PROGRAMMABLE
FEATURES
Program number
Listening environment
Refer to the Active User Manual for information on
Optional Features and Programmable Features.
Battery
options
shown
below
rechargeable
1
2
3
4
Receiver unit
Dome
Charging
contact
Battery
compartment
Clip-on
microphone
cover
Inserting and removing
To insert the hearing instrument, make sure it is turned off by
opening the battery compartment to the first stop. Hold the
receiver with the dome or earmold between your thumb and
index finger and insert it carefully into the ear canal (Fig. 12).
You may find it helpful to pull your ear slightly upward or
backward when inserting your instrument. Then place the
instrument behind your ear and turn it on, by completely
closing the battery compartment.
To remove your hearing instrument, hold the receiver unit
between your thumb and index finger and carefully pull it out.
Fig. 12: Inserting the instrument
