Siemens RDS120, User Manual

Page: 28 / 40

Operating the thermostat from the mobile application
Viewing and controlling devices in different locations
7
28 | 40 A6V10733807_enUS_c
Operating hours widget
View heating and/or cooling operating hours of the current week, month or year.
The widget can be viewed vertically (portrait) and horizontally (landscape, auto-
rotation function of the phone/tablet is enabled). When viewed horizontally, the
widget also allows you to scroll among available pages.
NOTE: You can show/hide the trend in the chart by tapping the specific legend
atop.
7.4.3 Switching between Away and At home
You can set your thermostat to Away mode to avoid wasting energy, or to At
home mode for a comfortable room temperature.
Switch between Away and At home
● Tap
At home or Away at the bottom of any widget.
7.4.4 Setting schedules
This is the default schedule:
Days Time periods when Comfort
mode is on Time periods when
Unoccupied mode is on
Monday to
Friday 6 AM
– 8 AM
5 PM
– 10 PM
8 AM
– 5 PM
10 PM
– 6 AM
Saturday to
Sunday 7 AM
– 10 PM
10 PM
– 7 AM
To program a different schedule, set up different time periods for the following
operating modes:
Comfort , Economy and Unoccupied . For more information
about these operating modes, see Operating modes in a schedule [
➙
16].
When the schedule for one day is set, it can be copied to other days. In addition,
preset setpoints for different modes can be customized.
Initiate schedule operation
● From the Home screen of either the local hardware unit or the mobile
application, tap if is not displayed on the screen.
Operating mode may change if the built-in PIR sensor function is enabled and
presence is detected. See Presence detection using the built-in PIR sensor
[
➙
11] for more information.
To run the schedule without influence of the built-in PIR sensor, disable Room
presence detector under Advanced Settings > Optimization in the thermostat.
Set time periods for different operating modes
1. On the temperature control widget screen, tap > Thermostat schedule , and
then tap Edit .
2. Select the day of the week for which you want to set a schedule. By default, the
system uses the current day.
3. On the vertical time line, tap a specific time to set a switching point. A switching
point marker displays next to the time. To fine-tune the switching point, drag
the switching point marker to the desired time.
4. Tap the switching point marker and select Comfort , Economy or Unoccupied
from the drop down list.