background image

6 / 9 

Siemens 

RDD100.1DHW   Room thermostat with independent DHW control 

CB1N1421en_01 

Building Technologies 

 

2013-03-14 

(From the calculation – assuming 4 operations per day on the thermostat, the esti-
mated 1-second scanning rate results in a battery life of 1 year. If the user in-
creases the scanning rate, the batteries’ life is extended.) 

 

If the battery symbol 

 appears, the batteries are almost exhausted and should 

be replaced. Use alkaline batteries type AAA. 
 
 

Operating notes 

The RDD100.1DHW provides Comfort, Economy and Protection mode. The differ-
ence between Comfort and Economy mode is only the room temperature setpoint. 
The changeover between Comfort, Economy and Protection mode is made by 
pressing touchkey 

When Comfort mode is activated, symbol   appears on the display. The setpoint 
(20 ºC) can be readjusted by pressing touchkeys 

+

 

and 

 
When Economy mode is activated, symbol   appears on the display. The setpoint 
(16 ºC)

 

can be readjusted by pressing touchkeys 

+

 

and 

.  

 
If the temperature falls below 5 ºC, the unit automatically activates the heating out-
put. The symbol   appears only, if the icon is enabled via parameter settings.  

 

When this DHW function is activated, symbol 

 appears on LCD.  

 
 

Maintenance notes 

The thermostats are maintenance-free. 
 
 

Disposal 

 

In terms of disposal, the room thermostats are classified as electronic scrap con-
forming to the European Directive 2011/65/EU (WEEE) and must not be disposed 
of as unsorted domestic waste. The relevant national legal regulations must be 
complied with and the units must be disposed of via the appropriate channels. 
Local and currently valid legislation must be observed. 

Technical data 

Operating voltage 

  RDD100.1DHW 

                      

 
DC 3 V (2 x 1.5 V alkaline batteries AAA) 

For battery life (RDD100.1DHW), see below (alkaline batteries type AAA). 
Battery life calculation is based on the touchpad scanning rate during idle time 
(assuming a user presses 4 touchkeys per day): 
Scanning rate 0.25 s 
Scanning rate 0.50 s                            
Scanning rate 1.00 s     
Scanning rate 1.50 s   

193 days battery life  
273 days battery life 
345 days battery life 
378 days battery life 

Change of batteries  

Comfort mode    

Economy mode   

Protection mode   

DHW 

  

 Power supply 

Summary of Contents for RDD100.1 DHW










Reviews: