U42093-J-Z716-1-74
Operating Manual
Configuring the PSFR-CP41
Display POST Status
Display POST Status
This option displays the results of the most recent power on self test (POST).
The POST test results are shown below.
Display Trace and Assertion History
This option allows for internal trace state information to be dumped to the serial
port and captured. This is useful to debug installation issues, and can be
provided for failure analysis. Further information on using this interface can be
located in the troubleshooting section of this manual.
Status of Power-on Self Test
Version: X.X
XXXX
Serial Port Loopback ............................ passed
Monitor-flash Checksum........................... passed
Program-store Main RAM .......................... passed
Trace Buffer in Main RAM ........................ passed
PCI Protocol RAM ................................ passed
SCSI Script RAM ................................. passed
Fibre-channel Port Single-frame Sequence Loopback .... passed
Fibre-channel Port Multi-frame Sequence Loopback ..... passed
Ethernet Port Loopback .......................... passed
SCSI Port Loopback .............................. passed
Press Any Key to Continue...
Trace Dump Menu
Version: X.X
XXXX
1) Display trace for current boot cycle
2) Display trace from previous boot cycle
3) Display trace from last assertion failure
4) Display history of assertion failures
5) Clear current trace buffer
X) Return to previous menu
