Siemens PCA2005-A1 Technical Manual Download Page 11

Page: 11 / 34

Safety

Safety notes

A6V11571319_en--_b

11 | 34

2 Safety

2.1 Safety notes

Comply with the following safety notes to protect life, limb, and property.

The safety notes in the document include the following elements:

●

Symbol for hazard

●

Signal word

●

Type and source of hazard

●

Consequences in the event the hazard occurs

●

Measures or prohibitions to prevent the hazard

Symbol for hazard

This is the symbol for hazard. It warns you of

Risks of injury

Comply with all measures designated by this symbol to prevent injury or
death.

Additional hazard symbols

These symbols indicate general hazards, type of hazard, possible consequences,
measures and prohibitions, a sample of which is displayed in the following table:

General hazard

Potentially explosive
atmospheres

Voltage/electrical shock

Laser light

Battery

Heat

Signal word

The signal word classifies the hazard as defined in the following table:

Signal word

Danger level

DANGER

'DANGER' identifies a dangerous situation, that

results directly in death or

serious injuries

, if you do not avoid this situation.

WARNING

'WARNING' identifies a dangerous situation, that

can result in death or serious

injuries

, if you do not avoid this situation.

CAUTION

'CAUTION' identifies a dangerous situation, that

can result in minor or

moderate injuries

, if you do not avoid this situation.

Note

NOTE

' identifies a possible situation that may cause damage if not observed.

NOTE

' does not reference possible injury.

Depiction of risk of injury

Notes on risk of injury is depicted as follows:

Summary of Contents for PCA2005-A1



































Search results

Summary of Contents for PCA2005-A1

Reviews:

Related manuals for PCA2005-A1

Brands by name

Popular brands

Siemens PCA2005-A1, Technical Manual

Search results

Summary of Contents for PCA2005-A1

Reviews:

Related manuals for PCA2005-A1

Brands by name

Popular brands