Mounting
3-2
SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual
Edition 07/02
3.1
Mounting cut-out
3.1.1
Panel PC 670
A mounting cut-out is required as shown in the figure below:
Operating units
W
H
D
2
)
D
3
)
(a) with key-based front panels:
10.” TFT / 12.1” TFT
450 290 100
69
15.1” TFT
450 321 130
91
(b) with touchscreen front panels:
12.1” TFT
368 290 130
85
15.1” TFT
450 290 130
91
W
+1
H
+1
Rz 120
min. 1.5 to max. 6
D
+1
186
0.5
135
0.5
5
0.5
24
0.5
24
0.5
1
)
1
)
1
) cut–outs only for 15” TFT (keyboard version)
2
) mounting depth standard mount form factor,
operating and computing unit
3
) mounting depth remote mount form factor,
only operating unit
Fig. 3-1
Mounting cut-out for standard mounting of Panel PC 670 (width x height x depth in mm)
When installing in an enclosed housing, ensure that there is sufficient vo-
lume for air circulation and, if necessary, for swinging out the computing
unit (see also Figure 2-9 and 4-1).
The maximum air intake temperature must not exceed 45
°
C.
