background image

3 / 12

CE1N3547en_c

Siemens

2018-10-10

Building Technologies

Notes

Limitations

VAV compact controllers are not suitable for environments where the air is saturated with
sticky or fatty particles or contain aggressive substances.

Safety

Caution

National safety regulations

Failure to comply with national safety regulations may result in personal injury and
property damage.

Observe national provisions and comply with the appropriate safety regulations.

Mounting

Do not open the damper actuators.

Do not use the accessory mounting holes for fixation of the damper actuators.

Mounting positions

IP54 protection in following mounting positions

Accessory mounting holes

2)

Cf. mounting instr. M3547

2)

Not to be used for fixation of the actuator, use anti-rotation-bracket instead.

Maintenance

The damper actuators are maintenance-free.
Disconnect the electrical connections from the terminals if you want to work at the device.

Disposal

The device is considered electrical and electronic equipment for disposal in
terms of the applicable European Directive and may not be disposed of as do-
mestic garbage.

  Dispose of the device through channels provided for this purpose.

  Comply with all local and currently applicable laws and regulations.

Summary of Contents for OpenAir G B181.1E/KN Series













Reviews: