manualshive.com logo in svg

Siemens OP17, Equipment Manual

Share
Download
Siemens OP17 Equipment Manual Download Page 159

B-15

Equipment Manual OP7, OP17
Release 04/99 

Remedy:

Cause

Mes-
sage

685

Configuration error. Two tags that supply infor-
mation about the faulty function (Tag 1) and the
faulty parameter (Tag 2) are transferred together
with this message.

Variable 1:
535

Conversion, Linear 1

536

Conversion, Linear 2

537

Increment, variable

539

Increment current

545

Convert value

Variable 2:

This specifies the parameter of the function in
which an error has arisen (e.g. Tag 2 = 3: parame-
ter 3 of the Tag 1 function is faulty).

If you are dealing with a configura-
tion error: delete the function and re-
configure.

Or if the OP tries to determine the
value of a tag while no PLC is con-
nected: connect a PLC.

686

Too many variables.

701

Internal error

Incorrect assignment of “head –> res“ when re-
ceiving variable.

702

Job can not be executed.

Change interface or configure area
pointer.

703

Flash memory full.

Restrict the configuration.

704

Incorrect CPU specified under ”PLC –> Parame-
ters”.

Change configuration and retransfer.

705

An acknowledged message can not be entered in
the buffer because the corresponding message or
a message in the same acknowledgement group is
missing.

706

Recipe request will not be processed as another
request is already active.

707

Internal error

S7 message task error.

708

Internal error

Incorrect mailbox type

709

Internal error

Invalid mailbox type.

710

Internal error

Incorrect mode.

711

Internal error

Display status invalid.

712

No submenu configured.

713

Internal error

No special operator object configured.

Summary of Contents for OP17







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands