Siemens miniTek, User Manual

Page: 24 / 360

Using the transmitter 24
X X
Connect the transmitter with the power plug to a
power supply or charge it regularly.
X X
Use one of the supplied cables to connect the
transmitter to an external device
(refer to graphic on previous page).
X X
Press on/off switch to turn the transmitter on.
The LED on the transmitter flashes blue while
searching a connection to your miniTek.
X X
Use the supplied adhesive tape to affix the transmitter
at a suitable place.
X X
Press for about 3 seconds to turn the
miniTek on.
X X
Press on miniTek to change to the audio source
manually (refer to table “Changing the audio source” in
chapter "Basic function").
flashes while your miniTek is searching for a
connection and it shines constantly if a connection is
established.
The LED on the transmitter shines blue if a connection
is established.
Each time you press , your miniTek switches to the
next available audio source according to table „Changing
the audio source“ in chapter „Basic functions“.