7ML19985JD01
Test Chain – INSTRUCTION MANUAL
Page 3
Technical Data and Specifications
The test chain assembly is available in two components: the test chain and the reel.
Test Chain Design and Features
•
Chains are configured as single width or double width roll sets in pitches of 4” (10
cm) or 6” (15 cm) between adjacent rolls.
•
Chain rollers are provided with oil impregnated bronze bushings.
•
Side plates, pins, and end shackles are made from C1018 and C1020 cold rolled steel.
•
End Shackles are fitted with Eye links for attachment of wire rope.
•
Rollers are made from C1010 hot rolled steel.
•
Roll bars/Cotter pins are made from 304 stainless steel.
•
Connection links are retained by stainless steel roll bars.
•
A brass plate bearing the calibrated weight in lb/ft or kg/m is fixed to the end
shackle.
•
The chain is sprayed with a rust inhibitor.
•
Nickel plated chains are available on special request.
Single Roller Bushed Test Chain
test chain
roller
test chain
shackle
pitch
roller
diameter
roller pin (st. steel)
roller shaft (removable)
test chain
link
shaft length
chain length to center
line of last roller
washer
Test Chain.book Page 3 Tuesday, April 19, 2005 9:34 AM
Summary of Contents for milltronics TEST CHAIN
Page 1: ...Instruction Manual April 2005 TEST CHAIN milltronics ...
Page 4: ...ii ...
Page 18: ...Notes ...
Page 19: ......
