Siemens milltronics TEST CHAIN, Instruction Manual

Page: 5 / 20

7ML19985JD01 Test Chain – INSTRUCTION MANUAL Page 1
Safety Notes
1
Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
Unit Repair and Excluded Liability
• The user is responsible for all changes and repairs made to the device by the user or
by the user’s agent.
• All new components are to be provided by Siemens Milltronics Process Instruments
Inc.
• Restrict repair to faulty components only.
• Do not reuse faulty components.
The Manual
This instruction manual is intended to provide the basic guidelines for installation,
operation and maintenance of the calibration test chain and storage reel compartment.
This manual will help you set up your test chain for optimum performance. We always
welcome suggestions and comments about manual content, design, and accessibility.
Please direct your comments to techpubs.smpi@siemens.com. For a selection of
Siemens Milltronics weighing manuals, go to www. siemens.com/processautomation.
Under
Weighing Technology
, select
Continuous Weighing Systems
and select the manual
archive listed under the product family.
1.
This symbol is used when there is no corresponding caution symbol on the product.
WARNING: relates to a caution symbol on the product, and means
that failure to observe the necessary precautions can result in
death, serious injury, and/or considerable material damage.
WARNING:
1
means that failure to observe the necessary
precautions can result in death, serious injury, and/or considerable
material damage.
CAUTION: means that failure to observe the necessary precautions can
result in considerable material damage.
Note:
means important information about the product or that part of the operating
manual.
Notes:
• Please follow the installation and operating procedures for a quick, trouble free
installation and to ensure the maximum accuracy and reliability of your test chain.
• This manual applies to the test chain only.
Test Chain.book Page 1 Tuesday, April 19, 2005 9:34 AM