Siemens Milltronics MUS, Operating Instructions Manual

Page: 2 / 50

©
Siemens AG 2012
Safety Guidelines
Warning notices must be observed to ensure personal safety as well as that of others, and to protect the product and the connected
equipment. These warning notices are accompanied by a clarification of the level of caution to be observed.
Qualified Personnel
This device/system may only be set up and operated in conjunction with this manual. Qualified personnel are only authorized to install
and operate this equipment in accordance with established safety practices and standards.
Unit Repair and Excluded Liability:

The user is responsible for all changes and repairs made to the device by the user or the user’s agent.

All new components are to be provided by Siemens Milltronics Process Instruments.

Restrict repair to faulty components only.

Do not reuse faulty components.
Warning:
Cardboard shipping package provides limited humidity and moisture protection. This product can only function properly
and safely if it is correctly transported, stored, installed, set up, operated, and maintained.
This product is intended for use in industrial areas. Operation of this equipment in a residential area may cause interference to
several frequency based communications.
Note:
Always use product in accordance with specifications.
Copyright Siemens AG 2012. All Rights Reserved Disclaimer of Liability
This document is available in bound version and in
electronic version. We encourage users to purchase
authorized bound manuals, or to view electronic versions as
designed and authored by Siemens Milltronics Process
Instruments. Siemens Milltronics Process Instruments will
not be responsible for the contents of partial or whole
reproductions of either bound or electronic versions.
While we have verified the contents of this
manual for agreement with the instrumentation
described, variations remain possible. Thus we
cannot guarantee full agreement. The contents of
this manual are regularly reviewed and
corrections are included in subsequent editions.
We welcome all suggestions for improvement.
Technical data subject to change.
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments.
Contact SMPI Technical Publications European Authorized Representative
at the following address:
Technical Publications Siemens AG
Siemens AG Industry Sector
Siemens Milltronics Process Instruments 76181 Karlsruhe
1954 Technology Drive, P.O. Box 4225 Deutschland
Peterborough, Ontario, Canada, K9J 7B1
Email: techpubs.smpi@siemens.com

For a selection of Siemens Milltronics level measurement manuals, go to:
www. siemens.com/processautomation
. Under Process Instrumentation, select
Level Measurement
and then go to the manual
archive listed under the product family.

For a selection of Siemens Milltronics weighing manuals, go to:
www. siemens.com/processautomation
. Under Weighing Technology, select
Continuous Weighing Systems
and then go to the
manual archive listed under the product family.