Siemens Milltronics L-300, Instruction Manual

Page: 9 / 24

7ML19985EQ01 Milltronics L-300 – INSTRUCTION MANUAL Page 5
Sensing Plate Mounting Details
C
dynamic beam Load cell (2)
socket head cap
screw M12-1.75x25 (8)
Lockwasher ø12(9)
static beam
hex screw M6-1 x 35(4)
hex nut M6-1(4)(set on both
sides for negative deflection of –
20 mV and a positive deflectin of
+30 mV, with 10 V DC excitation)
calibration pulley (secure
with M6 socket head cap
screws
calibration weight
(applied to
calibration pin with
calibration cable
sensing plate fixing bolts M12-1.75
x C/W M12 lockwasher
calibration pin
(TYP)
sensing plate (Install by
positioning ball of each cable
and then fixing sensing late
to dynamic beam). Top of
sensing plate must be level
in two planes.
S.S hex nut M6-1 (4) with set
screw (Factory set)
cable (2) (Both
cables must be
left taut)
Cable
hex bot M8-1.25 x 25
(4) Hex nut M8-1.25 (4)
Flatwasher ø8 (8)
(Factory set)