en
9
Removing the metal grease filter
1.
Pulling out the filter drawer
2.
Push the lock and push the metal grease filter
backwards and pull downwards.
While doing this, place your other hand under the
metal grease filter.
Note:
To avoid causing damage, do not bend the
metal grease filter.
3.
Take the metal grease filter out of the holder.
Note:
Fat may accumulate in the bottom of the metal
grease filters. Hold the metal grease filter level to
prevent grease from dripping out.
4.
After removing the metal grease filter, clean the
inside of the appliance.
5.
Clean the metal grease filter and allow it to dry
before re-fitting.
Installing the metal grease filter
1.
Attach the metal grease filter.
While doing this, place your other hand under the
metal grease filter.
2.
Fold the metal grease filter upwards and engage the
locking mechanism.
Changing the activated charcoal filter (only
in circulating-air mode)
The filter should be serviced regularly to achieve the
odour isolation level.
The activated charcoal filter must be replaced at least
every 4 months.
Notes
■
The activated charcoal filter is not included. You can
purchase the activated carbon filter from your
authorised dealer, customer service or the online
shop.
■
The activated carbon filter cannot be cleaned or
reactivated.
1.
Remove the metal grease filter.
2.
Turn the old activated charcoal filters and pull them
from the holder.
¨
3.
Push the new activated charcoal filters onto the
holder and turn.
©
4.
Attach the metal grease filter.
%
$
Summary of Contents for LI63TCA 1T Series
Page 2: ......
