Page size
：
16k
（
18.4
×
26cm
）
Hang the cooker hood on the mounting rail on the wall to
make sure the cooker hood does not shake or hook off.
Keep the cooker hood horizontal.
Install the accessory fixing screws in the notch as shown in
the figure to prevent the cooker hood hooking off from the
mounting arm.
Each cooker hood is equipped with an expansion exhaust
duct with a diameter of 175 mm. The exhaust duct is 1.65 m
long when completely stretched.
Please connect one end of the exhaust duct to the outlet
duct on the cooker hood and connect the other end of the
exhaust duct to the common chimney duct or the drilling hole
in the external wall (the diameter of the drilling hole is 180
mm).
Common chimney duct
directly discharge outside the wall
To make the cooker hood effectively discharge fume in the
kitchen:
1.
Bending angle of exhaust duct cannot be smaller than 90
°
.
2.
The exhaust duct can not be bended into a “
凹
” shape and
the number of the turnings must be reduced to the minimum.
3.
DO NOT connect the exhaust duct to an exhaust duct with a
diameter smaller than 175 mm.
4.
DO NOT use a duct with a diameter smaller than 175 mm as
the intermediate connecting pipe.
Max. 1.65m
Ø195mm
195mm
Installation
Fix Cooker Hood
Connect Exhaust Duct
195mm
12
Summary of Contents for LC55SK950W
Page 2: ...Page size 16k 18 4 26cm ...
