Siemens IC60, User Manual

Page: 17 / 132

System Settings
17
Building Technologies
Fire Safety & Security Products 08.2007
4.3 Keypad button backlight adjustment
Increasing the keypad button backlight
z
By holding down the <CTRL> button and repeatedly pressing the <UP> arrow
button the keypad LED backlight level can be increased to the maximum.
Decreasing the keypad button backlight
z
By holding down the <CTRL> button and repeatedly pressing the <DOWN> ar-
row button the keypad LED backlight level can be decreased to the minimum.
4.4 Volume adjustment of the keypad buzzer
Î
Hold down the <CTRL> button.
Î
By repeatedly pressing the 'A' button the volume of the buzzer tone can be in-
creased.
Î
By repeatedly pressing the 'B' button the volume of the buzzer tone can be
decreased.
4.5 How to change or add codes
4.5.1 Change codes
Enter the CLIENT mode:
1.
Press: <PROG>
2. Enter: Master/User Pin Code (default 147258)
3. Press <ENTER>
Î
DISPLAY: Client: User
Change the code:
1.
Press <1>
2. Press <ENTER>
3. Press <1> (<1> to change master code, <2>…<100> for user code change)
4. Press <ENTER>
Use the numeric keyboard to enter your new master code.
The code may be any combination of 1 to 6 digits.
5. Enter the code
6. Press <ENTER> to save your new code.
Î
The new code will be indicated to you. 1 long beep indicates an unacceptable
code.
4. .Press <PROG> and < ENTER > to exit the User Code Program mode.
WARNING It is recommended to use a multi-digit code.
EN