Time-setting options
en
17
Semi-automatically programming the switch-off time
This function allows you to set the end of the cooking
time for your food. The oven will switch off automatically
at the end of the cooking time. This means that you do
not have to stop what you are doing to switch off the
oven, and prevents the food from accidentally being
cooked for too long.
1.
Use the function selector to set the heating function.
2.
Use the temperature selector to set the temperature.
3.
Press the
0
button repeatedly until "end" appears
on the display. When "end" appears, the symbol "A",
the current time and the
z
symbol will flash on the
display.
4.
Use the "+" and "-" buttons to set the end of the
cooking time.
5.
The current time will appear and the "A" symbol and
the
z
symbol will be lit continuously on the display.
The oven will now heat.
End of the cooking time
An audible signal will sound when the set switch-off
time has been reached. Use the
0
button to switch off
the timer.
Fully automatic programming
The oven can be programmed to the time at which the
dish is expected to be ready. The oven will switch itself
on automatically and switch itself off again at the
required time. This means that you can, for example,
place a dish in the cooking compartment in the morning
and programme it so that the dish will be ready at
midday.
Make sure that food is not left in the cooking
compartment for too long as it may spoil.
1.
Set the cooking time as described in the section
entitled "Semi-automatically programming the
cooking time".
2.
Set the end of the cooking time as described in the
section entitled "Semi-automatically programming
the switch-off time".
The oven will switch itself on at the right time for the
cooking time length and off again at the switch-off time
that has been set.The "A",
z
and
x
symbols will light
up and stay lit.
Once the oven has switched itself on, the "A" symbol
and the
z
symbol will be lit continuously on the
display.
An audible signal will sound when the oven is switched
off.
End of the cooking time
Use the
0
button to switch off the timer.
Cancelling programming
Pressing the "+" and "-" buttons at the same time for 2
seconds will cancel any fully automatic or semi-
automatic programmes that have been set.
Note:
This does not apply to timer volume setting.
Changing the audible signal
Pressing and holding the "-" button for 5 seconds while
the timer is showing the current time will make the clock
issue a warning signal. The clock has three different
audible signals. A different signal will sound each time
the "-" button is pressed. The last signal you selected is
saved as the default tone.
Summary of Contents for HK9K9V850M
Page 2: ......
