Siemens Hicom 300 H Operating Instructions Manual Download Page 25

Page: 25 / 167

Answering and making calls

Step by Step

Incoming call on loudspeaker (speaker
call 2-way)

A colleague addresses you directly over the speaker.
The speakerphone mode is automatically activated.

Answering via speakerphone is immediately possible.

Lift the handset and reply.

Activating/deactivating stop voice calling

You can prevent other persons from making direct calls
to you. Any attempt to address you directly via the loud-
speaker will be changed to a normal call.

Press the key. The lamp lights up.

Enter the service code.

Select and confirm.

and

Confirm.

Answering a call on the headset

Precondition:

The headset is connected. The headset

key has been configured.

The lamp flashes when a call is received.
Press the key to answer the call.

Ending the call:

Press the key. The lamp goes out.

You can address the colleague directly
(

page 29).

program/service

Feature settings?

Speaker call protect?

Activate?

Deactivate?

Headset

Summary of Contents for Hicom 300 H








































































































































































Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands

Siemens Hicom 300 H, Operating Instructions Manual

Search results

Summary of Contents for Hicom 300 H

Reviews:

Related manuals for Hicom 300 H

Brands by name

Popular brands