7
Levelling the cooker
Always place the cooker directly on the floor.
1.
Pull out the plinth drawer and lift it up and out.
There are adjustable feet at the front and rear on the inside of
the plinth.
2.
Use an Allen key to raise or lower the adjustable feet as
necessary until the cooker is level (picture A).
3.
Push the plinth drawer back in (picture B).
Wall fixing
To prevent the cooker from tipping over, you must fix it to the
wall using the enclosed bracket. Please observe the installation
instructions for fixing the oven to the wall.
Your new appliance
In this section you will find information on the appliance, the
operating modes and the accessories.
General information
The design depends on the respective appliance model.
Cooking area
Here is an overview of the control panel. The design depends
on the respective appliance model.
Residual heat indicator
The hob has a residual heat indicator for each hotplate. It
shows which hotplates are still hot. Even if the hob is switched
off, the display remains lit until the hotplate has cooled down
sufficiently.
You can save energy by using the residual heat to keep a small
dish warm, for example.
%
$
Explanations
1
Hob**
2
Control panel**
3*
Cooling fan
4
Oven door**
5*
Plinth drawer**
* Optional (available for some appliances)
** Details may vary depending on the appliance model.
Explanations
1
Hotplate 18 cm
2
Hotplate 14.5 cm
3
Hotplate 14.5 cm
4
Hotplate 21 cm
5
Residual heat indicator
Summary of Contents for HA422510M
Page 2: ......
