Siemens HA422510M, Instruction Manual

Page: 15 / 24

15
Attaching the door
Reattach the oven door in the reverse sequence to removal.
1.
When attaching the oven door, ensure that both hinges are
inserted straight into the opening (figure A).
2.
The notch on the hinge must engage on both sides (figure B).
3.
Fold back both locking levers (figure C). Close the oven
door.
:
Risk of injury!
Risk of injury. If the oven door falls out accidentally or a hinge
snaps shut, do not reach into the hinge. Call the after
­ sales
service.
Removing and refitting the door panels
The glass panels can be removed from the oven door to allow
more thorough cleaning.
Removal
1.
Removing the oven door See the section Removing the oven
door . Lay the oven door on a cloth with the handle facing
downwards (Fig. A).
2.
First turn the two screws at the bottom anticlockwise, then the
two screws at the top, also anticlockwise (Fig. B).
3.
Remove the cover (Fig. C).
The parts that have been removed must not be washed. Clean
the panels with a glass cleaner and a soft cloth.
:
Risk of injury!
Scratched glass in the appliance door may develop into a
crack. Do not use a glass scraper, sharp or abrasive cleaning
aids or detergents.
Refitting
1.
Place the cover back in position (Fig. A).
2.
First retighten the two screws at the bottom, then the two
screws at the top (Fig. B).
3.
Fitting the oven door See the section Fitting the oven door .
Do not use the oven again until the panels have been
correctly fitted.
Oven door - Additional safety precautions
During long cooking times, the oven door may become very
hot.
If you have small children, extra supervision is required during
oven operation.
In addition, there is a protective device (protective grid) which
prevents direct contact with the oven door. You can purchase
this optional accessory (469088) from the after-sales service.
% $
&
%
$
&
%
$