Siemens Gigaset WLAN Operating Instructions Manual Download Page 97

Page: 97 / 130

Advanced Setup

Gigaset WLAN Repeater/ englisch / A31008-E505-B105-1-7619 / advanced_config.fm / 08.03.2004

Restore Settings

In the

Save & Restore

menu, select

Restore Settings

Click on the

Browse

button. From the file selection window, choose the directory

where you saved the backup file.

Double-click on the file containing the configuration you want to restore. The full
path to this file is shown in the box to the left of

Browse

Click on

. The backed up configuration will now be loaded.

After completion of this procedure, you should restart all the devices.

Please remember:

The password is now the one you assigned before the backup.

Summary of Contents for Gigaset WLAN



































































































































Search results

Summary of Contents for Gigaset WLAN

Reviews:

Related manuals for Gigaset WLAN

Brands by name

Popular brands

Siemens Gigaset WLAN, Operating Instructions Manual

Search results

Summary of Contents for Gigaset WLAN

Reviews:

Related manuals for Gigaset WLAN

Brands by name

Popular brands