76
Advanced Setup
Gigaset WLAN Repeater/ englisch / A31008-E505-B105-1-7619 / advanced_config.fm / 08.03.2004
ì
Enter the current password in the
Current password
box. The factory setting is
admin
.
ì
Enter a password in the
New password
box and repeat it in the box underneath.
The password may contain up to 12 characters. The password is case sensitive.
Avoid proper names and all too obvious words. Use a combination of letters, num-
bers and special characters.
ì
Check the value in
Idle time out
.
Here you can define when the configuration session should be automatically termi-
nated if no more entries are made. The default entry is 10 minutes.
For security reasons you should enter a smaller value.
ì
Click on
OK
to apply the settings.
Please remember:
If you ever forget the password you will have to reset your Gigaset WLAN Repeater to
the factory settings using the reset button (see page 102). Please bear in mind that
this will restore all the settings to the factory configuration. The password will then
be
admin
.
Please remember:
If you enter 0 the session will never be cut automatically. Then you will have to close
the session by clicking on
Logout
.
