83
Configuring the Advanced Settings
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005
Sc
hablone 2005_05_02
ì
Select the
Access rule type
from the list:
–
Apply to all clients
: The rule applies to all PCs in your network.
–
Specify IP address range
: You select the PCs to which the rule is to apply by
entering an IP address block.
–
Specify IP address
or
Specify MAC address
: The rule applies to a PC you select
via the IP address or MAC address.
ì
Select a
Schedule rule
: The default setting is
Always
. You can create more
Schedule Rules
in the
Access Control
ì
Enter a name for the
Comment
for the access rule.
ì
Define the
Access level
.
You can apply
Deny access to the Internet
,
Allow web browsing with URL filter
,
Allow web browsing
or make user-defined settings:
– Select whether the URL filters you have set (see page 82) are to be activated.
– If you wish to create a
Service filter
, activate this option.
– In
Filtering mode
, determine whether the services you select are to be allowed
or blocked.
– Select the
Services
you wish to allow or block.
Select the
Protocol
and enter the appropriate
Port
(a single port number,
several individual port numbers separated by commas, port blocks consisting
of two port numbers separated by a dash, or any combination of these, for
example
80,90-140,180
). The
Description
displayed helps you to identify dif-
ferent services.
– Activate the
Filter
option to use the relevant service for the service filter.
– You can also select services from the
Predefined applications
list.
